Sheet MetalAMADA CO., LTD.

Sheet Metal Processing
AMADA provides all the machines, software, peripheral equipment and consumables required for the process of sheet metal fabrication.

Blanking machines

This is the process to cut the metal sheets into the parts as specified in the drawing.

Laser Machines

Machines to open holes and cut thin sheets of metal (sheet metal) using a laser beam. A full line of oscillators is available for both fiber lasers (made in-house) and CO2 lasers.

Click here for information on laser machines

Punch/laser combination machines

Punch and Laser combination machine. The machine is capable not only for cutting and piercing of sheet-metal but also, the forming such as extrusion and tapping that were done by other machineries.

Click here for information on punch and laser combination machines

Turret punch presses

Machines to perform punching operations, such as opening and cutting round, square and variously shaped holes in thin sheets of metal (sheet metal). Cutting components for punching and cutting holes are referred to as tooling.

Click here for information on punching machines

Press brakes

Machines for bending thin sheets of metal (sheet metal) between an upper and lower tooling. Also referred to as press brakes.

Press brakes

Machines that meet the need for high speed and high accuracy bending of thin sheets to thick plates.

Click here for information on press brakes

Bending Robots

Robot systems that meet the need for automated bending.

Click here for information on bending robots

Welders (Welding machines)

Welding is a process used to join metals. Welding can be roughly divided into three types: fusion welding, pressure welding and brazing and soldering.

Laser Welding Machines

The machine focuses laser that is excited in the oscillator on a workpiece and welds it.

Click here for information on laser welding machines

General-Purpose Welding Machines

Machines that join metals using electric resistances.

Click here for information on General-Purpose Welding Machines

General fabrication machines

We can provide deburring machines for removing burrs from cutting and blanking processes, tapping machines for tapping threads and punching and notching machines for various structural steels.

Shearing machines

Machines that cut metal sheets into any size by shearing.

Click here for information on shearing machines

Corner shear

A machine that can easily cut a wide variety of corner notches.

Click here for information on corner shear

Deburring machines

Machines that remove burrs generated during processing.

Click here for information on Deburring machines

Tapping machine

Tapping machine that processes threads

Click here for information on tapping machine

Iron worker

A machine that can cut, drill, notch and bend various structural steels.

Click here for information on Iron Worker

AMS series

This is a versatile storage for long size sheet metal materials.

Click here for information on the AMS series

Environment Related Products

We provide dust collectors that collect dust and oil mist generated during welding, laser processing, and grinding to improve the factory environment, and degreasing and cleaning machines for metal parts.

Click here for information on Environment Related Products

Software

We provide key items to promote digitalization of processing, such as processing programming, production control, CAD/CAM, network and other software.

Production control/ Production control support system

This software controls the production of the entire factory. It registers ordered products, inputs process information, and makes estimations.

Click here for information on production control

CAD/CAM program

Prepares ordered product data and drawings as program data for the machine. Sends the data to the machine on the corporate LAN.

Click here for information on CAD/CAM program

Cloud service

It also helps customers take BCP-related measures and security measures such as construction of customer's factory network, backup of processing data and production control data.

Click here for information on cloud service

Consumables

AMADA offers a wide selection of cutting fluids, lubricants and other consumables that are chlorine-free and not subject to the PRTR Law.

Click here for information on consumables

Metal Cutting and Grinding MachineAMADA MACHINERY CO., LTD.

Metal Cutting Machines

Pulse Cutting Band Saw Machine

Carbide tipped band saw blade with dovetail-shaped tooth profile developed with expertise and technology.

Click here for information on Pulse Cutting Band Saw Machine

Semi-Automatic Metal Cutting Band Saw

H Series offers standard manual or semi-automatic versatile cutting machines.

Click here for information on Semi-Automatic Metal Cutting Band Saw

Automatic Metal Cutting Band Saw

The material feed function is automated. The NC-controlled cutting function allows for automatic flexible cutting.

Click here for information on Automatic Metal Cutting Band Saw

Vertical Block Plate Metal Cutting Band Saw

The table movement system offers vertical band saw machines suitable for precisely cutting large block and plate materials.

Click here for information on Vertical Block Plate Metal Cutting Band Saw

Other Machines

Other Metal Cutting Machines

Other Machines

Structural steel fabrication machines

High accuracy CNC drilling machine specifically designed for drilling holes in H-shape structural steel.

Band Saw Machine

This machine is suitable for cutting structural steels such as H-shape Steel, channel steel, angle steel and pipes.

Click here for information on Band Saw Machine

Surface Grinding & Deburring Machine

Deburring and surface grinding are mechanized in the drilling process. Reduced work load and a large dust collector improves work environment.

Click here for information on Surface Grinding & Deburring Machine

Beveling / Scallop Cutting Machines

Proprietary NC control automatically sets optimum high speed cutting conditions and only requires entry of basic data.

Click here for information on Beveling / Scallop Cutting Machines

Other Machines

Shot blast machines and drill grinding machines are also available.

Click here for information on Other Machines

Grinding Machines

Ultra High Precision Forming Grinder

Proprietary three-face standalone column and hybrid guide are adopted, which supports high precision surface and form grinding.

Click here for information on Ultra High Precision Forming Grinder

Forming Surface Grinder

For highly efficient processing, the wheel dressing, workpiece grinding, and inspection can be performed in one setup.

Click here for information on Forming Surface Grinder

Rotary Surface Grinder

Three times higher productivity than reciprocation type

Click here for information on Rotary Surface Grinder

Multiprocess center

Workpiece can be machined at high speed by turning both workpiece and the tool. Grinding using a vitrified grinding wheel is possible.

Click here for information on Multiprocess center

Full Automatic Programming System For Grinders

General fabrication machines

We can provide deburring machines for removing burrs from cutting and blanking processes, tapping machines for tapping threads and punching and notching machines for various structural steels.

Shearing machines

Machines that cut metal sheets into any size by shearing.

Click here for information on shearing machines

General-Purpose Welding Machines

Machines that join metals using electric resistances.

Click here for information on General-Purpose Welding Machines

Deburring machines

Machines that remove burrs generated during processing.

Click here for information on Deburring machines

Secondary Processing Machine of Sheet Metal / Dedicated Processing Machine

Environment Related Products

We provide dust collectors that collect dust and oil mist generated during welding, laser processing, and grinding to improve the factory environment, and degreasing and cleaning machines for metal parts.

Click here for information on Environment Related Products

Blades

High performance, high quality blades made of proprietary material with the world's best technology and thorough manufacturing and quality management.

Carbide tipped band saw blade

Carbide tipped band saw blade with dovetail-shaped tooth profile developed with expertise and technology.

Click here for information on Carbide tipped band saw blade

High speed steel bi-metal band saw blade

Best selling versatile blade capable of cutting steel materials ranging from structural steel to stainless steel

CLICK HERE FOR INFORMATION ON High Speed Steel Bi-metal Band Saw Blade

Carbon band saw blade

Blade suitable for cutting general steel, cast iron and nonferrous metal materials with small diameters

CLICK HERE FOR INFORMATION ON Carbon Steel Band Saw Blade

Contour Blade

Bi-metal blade developed for contour machines

CLICK HERE FOR INFORMATION ON Contour Blade

Circular Saw Blades

Wide array of product lineups covering various applications ranging from general steel to difficult-to-cut materials

Click here for information on Circular Saw Blades

Precision WeldingAMADA WELD TECH CO., LTD.

The machine focuses laser that is excited in the oscillator on a workpiece and welds it. Due to the feature as precise focal point, the laser welder is applied for automobile parts, electronic components, and medical instruments. There are some kinds of laser welders as fiber laser, YAG laser, and direct diode laser and so on.

Laser Welders

The machine focuses laser that is excited in the oscillator on a workpiece and welds it.

Fiber Laser Welder

Due to the beam characteristic different from that of YAG laser and the CW mode, the fiber laser welders provide high quality fine welding and high-speed seam welding.

Click here for information on Fiber Laser Welder

Pulsed Fiber Laser Welder

This series of pulsed fiber laser welders provide high-output, high-quality welding with a new type of fiber laser. These welders employ an air-cooling system, which does not use a chiller, thereby reducing operating costs.

Click here for information on Pulsed Fiber Laser Welder

YAG Laser Welder

A series of standard YAG laser welders.

Click here for information on YAG Laser Welder

YAG SHG Green Laser Welder

It enables faster and deeper welding of even copper and gold, which have high reflectance to YAG fundamental laser and are hard to be welded.

Click here for information on YAG SHG Green Laser Welder

Direct Diode Laser Welder

Light from its laser diode is directly used for thermal processing without passing through a YAG or YVO4 crystal in the laser unit. This welder thus performs quality plastic welding and soldering at low cost in an environmentally friendly manner, by using newly equipped function of Active heat control™.

Click here for information on Direct Diode Laser Welder

Laser Handy Welder

With the handy torch, anyone can easily perform laser welding of high quality. Suited for tacking, making prototype and repair.

Click here for information on Laser Handy Welder

Laser Scanning System for Welding

Using a galvoscanner, these systems provide high-speed and multi-spot welding without moving the workpiece on a movable stage such as an XY table.

Click here for information on Laser Scanning System for Welding

Laser Weld Monitor

A machine available for in-process monitoring in all welding. Available for pulsed and CW laser by high speed resolution. Light weight and compact design.

Click here for information on Laser Weld Monitor

Focusing head and Optical Fiber

This head unit efficiently collects laser light emitted from the optical fiber. The wide lineup of this output unit includes a head assembly with a CCD camera.

Click here for information on Focusing head and Optical Fiber

Laser Markers

The machine offers process as marking, removing, cutting and trimming with laser.

Fiber Laser Marker

Fiber laser marker equipped with a Maximum 50W oscillator.

Click here for information on Fiber Laser Marker

3D Fiber Laser Marker (20W/50W)

A 3D fiber laser marker equipped with long-awaited 3D features has been released as part of the popular fiber laser series! Performs high-speed, beautiful marking and processing on workpieces with uneven, sloping, cylindrical surfaces by using the variable Z axis!

Click here for information on 3D Fiber Laser Marker (20W/50W)

YVO4 Laser Marker

Popular for low-cost and high-quality marking. A fully air-cooled system is installed to reduce the running cost. A compactly designed oscillator allows for marking in a small footprint.

Click here for information on YVO4 Laser Marker

YVO4 SHG Laser Marker

The second harmonic generation laser (532 nm), with a wavelength half that of the fundamental-mode laser, enables clear marking on parts made of gold or copper which have too high a reflectance for normal laser markers.

Click here for information on YVO4 SHG Laser Marker

YAG Laser Marker (50W)

Using a high-power laser with a maximum output of 50 W, it decreases the takt time and enables deep-engraving and black marking.

Click here for information on YAG Laser Marker (50W)

Fine Spot Welders

Fine spot welding (resistance welding) is a joining method using heat generated from resistance caused by placing electrodes in contact with workpieces to apply force and let current flow into workpieces.

Transistor-controlled welding power supplies

These units offer ultra-precise welding due to transistor control which enables reducing splash by finely adjusting the weld current.

Click here for information on Transistor-controlled welding power supplies

DC Inverter-controlled welding power supplies

These units supply continuous power efficiently, because, unlike an AC-type power supply, it does not have any current downtime. Consequently, it offers a short weld time with excellent thermal efficiency, resulting in few heat-affected areas, and low power consumption. As it can be used with small welding transformers, it is suitable for a system integration.

Click here for information on DC Inverter-controlled welding power supplies

AC Inverter-controlled welding power supplies

These units are not only available inverter-type features such as an excellent thermal efficiency and stable weld quality, but also available a minimal Peltier effect (polar effect) due to the alternating current AC-current welding transformers are available. It is ideally suited to fusing.

Click here for information on AC Inverter-controlled welding power supplies

AC controlled welding power supplies

These unit are the most commonly used type of welding power supply. With a simple structure, it is easy to use, offers excellent durability, and is inexpensive. It is widely used for welding materials made of iron, a material that is relatively easy to weld.

Click here for information on AC controlled welding power supplies

Weld Heads

Weld heads, which are installed in fine spot welders, hold electrodes and perform welding by applying force to workpieces.

Click here for information on Weld Heads

Checkers and Testers

Weld checkers are essential for maintaining a stable weld quality as they enable you to control the weld current, voltage, welding time, applied force, and displacement.

Click here for information on Checkers and Testers

Pulsed TIG Welder / Checker

DC type pulsed TIG welders are the perfect solution for arc welding of precision and minute parts. This is because welding can be finished with small heat-affected area.

Click here for information on Pulsed TIG Welder / Checker

Pulsed Heat Controller

Pulsed heat controller controls pulsed current to obtain optimum heat for bonding multiple parts. Real-time temperature feedback from a thermocouple attached to a thermode enables to adjust heat temperature in detail and precision performance according to the programmed heat profile can be done.

Click here for information on Pulsed Heat Controller

Systems

AMADA WELD TECH offers one-stop solution for the design and manufacturing of processing systems that include not only welding machines for processing, but also conveyor robots, tool jigs, and software tailored to best meet your specifications. Our rich history of developing processing technologies is sure to meet your manufacturing requirements.

Secondary Batteries

We offer battery production technologies that make use of multiple lasers, such as the technology for sealing battery cases by welding. These technologies improve the quality and efficiency of the production of secondary batteries.

Click here for information on Secondary Batteries

FPD(LCD・PDP)

We have supplied many ID marking systems, which are essential for the manufacturing of flat panel displays. They can be applied to the latest large flat panel displays.

Click here for information on FPD(LCD・PDP)

Semiconductors

We have a wealth of experience in providing semiconductor wafer marking systems. Our unique laser marking systems deliver high-throughput wafer marking with no damage to circuits.

Click here for information on Semiconductors

Electronic Components

These systems are ideal for the laser processing of electronic components, such as circuit boards or chip resistors, and the deburring of plastic packages. Their compact design makes them easy to utilize in production lines.

Click here for information on Electronic Components

Resistance Welding Related Systems

We have a great deal of experience in supplying a variety of welding systems that incorporate our resistance welding technologies, such as welding for motors or processing for twisted wire ends.

Click here for information on Resistance Welding Related Systems

Press Automation SolutionAMADA PRESS SYSTEM CO., LTD.

Stamping presses

The material is processed through the dies. It is widely used in the production of electronic parts and the production of automotive parts that require drawing or progressive die processing.

Click here for information on Stamping presses

Stamping press equipments

We automate the process of coil feeding and workpiece transfer at stamping press line.

Coil Line System

This system unwinds coiled steel plates, straightens them out, and sizes and feeds the flat plates.Suitable for various processing situations, from small scale to large.

Click here for information on Coil Line System

Robot Line System

A series of robots that support the automation of press processing with sophisticated designs and a wide range of types and variations.

Click here for information on Robot Line System

Spring machines

All types of wire forming such as torsion spring, compression spring and extension spring forming are available. We are the top brand in the precision spring field, boasting the best technology in the industry.

Spring Formers

Our spring forming machines specialize in producing torsion springs. This machinery can form all kinds of springs, including torsion springs, extension springs, and compression springs.

Click here for information on Spring Formers

Coiling Machines

Spring machines that specialize in compression springs. These machines have an automatic program function for easy production of compression springs and a function for making curved tapered shapes.

Click here for information on Coiling Machines

Extension Spring Machines

Machines specializing in the production of extension springs, including English, German, and U hooks.

Click here for information on Extension Spring Machines

Leveling casters & Pads

Used to prevent vibration or noise generated by various machines used in offices, factories, and hospitals. CS series is equipped with casters for easy movement, setting and adjustment. The LP series has stronger anti-shock and anti-noise capabilities, and at the same time improves the freedom of the mountable surface.

Carry Set

For moving, fixing, anti-vibration and leveling of OA equipment and precision machinery.

Click here for information on Carry Set

Level Pad

Used for fixing, vibration isolation, leveling, and tilt adjustment of industrial machinery

Click here for information on Level Pad